General Rental Equipment To Support Subsea & Topside Options

Nitrogen Intensifier Unit

Description

The nitrogen intensifier is used to boost Nitrogen pressure for the testing of small components and similar applications where the volume is small, and efficiency is not vital. The unit will also control the maximum pressure via an air driven regulator.

Technical Details

Unit Dimensions	460 mm long x 310 mm wide x 420 mm high
Weight	25 Kg
Pump Type	Haskel AG75
Min Inlet Gas Pressure	17 Bar (250 psi)
Max Outlet Gas Pressure	775 Bar (11,250 psi)
Max Compression Ratio	25:1

• Suitable for Zone 1 Rated Areas

Portable Hydraulic Test & Clean Up Circulation Unit

Description

• The unit is housed in a robust mild steel frame with stainless steel instrumentation panel.
• The unit features stainless steel tubing, fittings, valves, and gauges. It has an air driven hydraulic pump with two high-pressure outlets, of which one is regulated.
• Incorporated in the unit is a diaphragm pump, which is used for clean up circulation through a filter system and a transfer pump using a 3-way valve system.
• All controls are panel mounted with hydraulic pressure gauges, isolation valves, and a 6-way instrument air panel, which is fed through two air regulators.

Technical Details

I.D. No.	WS132
Manufacturer	eProduction Solutions
Unit Dimensions	1.0 m x 1.3 m wide x 0.6 m
Weight	100 Kg
HP Pump Type	Haskel AW150
Diaphragm Pump Type	Wilden
Air Supply	100 psi
HP Pump Max Output Pressure	10,000 psi
Diaphragm Pump Max Output Pressure	100 psi
Diaphragm Pump Max Flow	57 GPM (280 l/m) with 100 psi air pressure input

Portable Hydraulic Test Unit

Description

The test unit has:

• A stainless steel enclosure
• Stainless steel tubing, fittings, valves and gauges
• An internal air driven hydraulic pump, that may be operated manually if no air is available
• All controls and bulkhead connections clearly labeled and arranged in a logical manner, permitting rapid and efficient operation
• The hydraulic pump function is routed via a three-way reservoir

Technical Details

Unit Dimensions	19 ¼" long x 15 ¼" wide x 11" high
Weight	2 kg
Pump Type	Haskel MS-110-HP
Air Supply	6.9 Bar (100 psi)
Alternate Supply	manual
Maximum Output Pressure	690 Bar (10,000 psi)
Relief Valve	724 Bar (10,500 psi set)

• Suitable for Zone 1 Rated Areas

Mini Hydraulic Power Unit

ID No. SER150

Description

• Hydraulic power unit. 6 way control panel complete with 3 micron filtration and flow meter
• The unit is supplied c/w lifting slings

Technical Details

1. 6 way control panel 6000 psi rated
2. ITT Barton flowmeter
3. 100 liter fluid reservoir
4. Air operated Haskel pump
5. Hydraulic regulator in line to 4 off control valves - 2 off control valves direct from pump pressure
6. Circulation clean up loop c/w sample point
7. Certified lifting points

• Built to Lloyds BS7072/IEE Recommendations
• Suitable for Zone 1 Rated Areas

Test Panel 

Specifications

All stainless steel construction with two side mounted lift points.

Dimensions	1.0 mtr X 0.65mtr X 1.17mtr
Tare Weight	500 kgs
Gross Weight	500 kgs
Working Pressure	6000 psi max
Air Operated Haskel Pump
Hydraulic Outlets	Two
Fluid Cleanliness	NAS 1638 Class 6
Diaphragm Fluid Transfer Pump Air Operated
Back Up Hand Pump

Flushing Unit FU10

Description

The flushing skid unit consists of:

• An electric motor with a variable flow rate hydraulic pump
• A filtration unit and a fluid reservoir

The unit is used for:

• Flushing hydraulic systems
• Any system that requires a NAS 1638 specification of cleanliness - a nitrogen purge can be installed at client request

Technical Details

Unit Dimensions	1.4 m long x 1 m wide x 1.1 m high
Weight	625 kg
Certifying Authority	DNV approved for Zone 1 operation
Motor Type	Hansen/Brook 77.00 kW
Motor Voltage	440 V, 3 phase
Hydraulic Pump Type	APEX Dennison
Hydraulic Pump Rate	0-90 liters variable flow at 40 bar
Safety Relief Valve Fitted	yes
Pressure Cut Off Switch Fitted	yes
Filtration Unit Fitted	3 micron

• Built to Lloyds BS7072/IEE Recommendations
• Suitable for Zone 1 Rated Areas

Diesel Driven Flushing Unit Onshore Use Only

Description

This flushing skid unit consists of:

• A diesel driven motor with a variable flow rate hydraulic pump
• A high pressure pump
• A filtration unit and a fluid reservoir

The unit is used for:

• Flushing hydraulic systems or:
• Any system that requires a NAS 1638 specification of cleanliness - the unit is ideally suitable for onshore site work when an electrical power supply is unavailable
• A nitrogen purge facility is available on this unit if required by client (s)

Technical Details

Unit Dimensions	2.13 m long x 1.43 m wide x 1.13 m high
Weight	3000 kg
Engine Type	28 HP Deutz
Hydraulic Pump Type	APEX Dennison
Hydraulic Pump Rate	0-50 liters variable flow
Safety Relief Valve Fitted	yes
Filtration Unit Fitted	3 micron
HP Pump Type	CAC
HP Pump Pressure	30,000 psi
LP Pump Pressure	100 bar
Fluid Filtered Before Test Pump	25 micron

• Built to Lloyds BS7072/IEE Recommendations
• Suitable for Zone 1 Rated Areas

Typical EDU Equipment

Typical Umbilical Deployment Frame