Specifications of the Red Eye® Hot Tap Insertion and Retraction Technology
| Hot-Tap Water-Cut Meter1 |
| Operating temperature, °F (°C) |
Process fluid (standard) 32 to 302 (0 to 150) |
| |
Ambient temperature (standard) -40 to 149 (-40 to 65) |
| Operating pressure at 302°F (150°C) maximum CWP, psi (bar) |
1,480 (102.04) |
| Flange, in. (cm) |
Outer diameter with 2-in. (5-cm) flange (600) ANSI bolt process connection 11.5 (29.2) |
| |
Bolt hole diameter for mounting 0.75 (1.91) |
| Wetted parts |
316L SS or Hastelloy C 276 with sapphire windows |
| Communications |
Modbus® RTU (standard) RS-232 or RS-485 ports |
| Display (LCD available) |
Two-line, 16-character vacuum florescent display |
| Output |
4 to 20 mA water cut |
| Power |
10 to 30 VDC |
| Physical dimensions (diameter x length), in. (cm) |
11.5 x 38 (29.2 x 96.5) |
| Weight, lb. (kg) |
40 (18.14) |
| Electrical |
|
| Power |
10 to 32 Vdc @ 1 Amp maximum |
Analog input (well selection and
flow rate) |
4 to 20 mA |
| Analog output (water cut) |
4 to 20 mA |
| High level frequency |
0 to 10 kHz at TTL level or 24 Vdc |
| Operating temperature, °F (°C) |
-40 to 159 (-40 to 65) |
| Certifications |
FM 06 ATEX 0021 Ex d IIB T3 IP66 Ta =-4° to 185°F (-20° to 85°C) |
| Vertical Spool Assembly |
| Packing material |
Compression packing material, 4 rings, in. (cm) 0.25 (6.35) |
| |
Outside diameter, in. (cm) 5.25 (13.3) |
| Pressure: maximum CWP, psi (bar) |
1,480 (102.04) |
Process connection,
in. (cm) |
600 lb. (272 kg) ANSI RF flange (top and bottom2) 2 (5.08) |
| |
Bolt hole diameter for mounting 0.75 (1.91) |
| Physical dimensions (diameter x length), in. (cm) |
11.5 x 7.5 (29.2 x 19.1) |
| Weight, lbs (kg) |
43.5 (19.7) |
| Wetted parts |
316L SS |
| Hot Tap Insertion and Retraction Tool |
| Physical dimensions, in. (cm) |
Overall size 15 x 18 x 39 (38.1 x 45.7 x 99.1) |
| |
Shelf and bottom-plate hole diameter 0.75 (1.91) |
| Material composition |
Aluminum |
| Weight, lb. (kg) |
104 (47.17) |
| Maximum line pressure, psi (bar) |
1,480 (102.04) |
1Red Eye MP water-cut meters are also available in hot-tap configurations.
2Bottom flange includes outer bolt pattern for attaching insertion and retraction tool. |
 |
